Search
English

Installation Materials

Quality materials for the professional and do-it-yourselfer

It is important to make sure that appliances in buildings or homes function properly and last for a long time. With the installation material from Kuldipsingh you can achieve this very well. You will find, among other things, pipes for electricity but also pipes and couplings for water supply and drainage. Perfect installation material for the professional but also for the do-it-yourselfer.

View as Grid List
Sort by
Display per page
Picture of FUTECH Telescopic Tripod
119740
Extendible pole for clamping between the floor and the ceiling up to 330 cm high for compact and 3-D prism lasers. Height adjustment by firmly clamping the platform to the stand. Fixed head with fixed 5/8” screw that allows the plumbing point to descend. Only for indoor use, ideal for small areas and/or great heights.
SRD 2,129.49
excl. BTW
Picture of FUTECH Telescopic Leveling Staff 400cm
119742
Staff extendible up to 400 cm with e-indication (cm) on the side and indication in mm on the rear (you can read below how high the receiver hangs above the staff).
SRD 1,232.88
excl. BTW
Picture of FUTECH Volt Tester 3500
119727
Non-contact, single-pole voltage detector detects alternating voltages above 12V or above 1000V with an acoustic and optical signal. Robust housing with safety specification CAT.III 1000V /CAT.IV 600V, small size and built-in LED flashlight.
SRD 333.63
excl. BTW
Picture of FUTECH Wallscanner 6300
119726
Detection depth wood: up to 38 mm, Detection depth metal studs: up to 76 mm, Detection depth live AC wires: 51 mm, Battery: 9V.
SRD 1,183.05
excl. BTW
Picture of HENCO Bracket
103761
This bracket ensures the correct distance (153 mm centre-to-centre) between the double wall plate of the 2PK-1604.
SRD 68.31
excl. BTW
Picture of HENCO Inner bending spring
103762
The inner bending spring is inserted into the tube, so it can be bent.
SRD 490.38
excl. BTW
Picture of HENCO Inner bending spring
103763
The inner bending spring is inserted into the tube, so it can be bent.
SRD 485.76
excl. BTW
Picture of HENCO Bend 90 degrees insertion
103766
This elbow (90°) for sanitary piping is quick and easy to install thanks to the push-in fitting.
SRD 155.76
excl. BTW
Picture of HENCO Bend 90 degrees insertion
103767
This elbow (90°) for sanitary piping is quick and easy to install thanks to the push-in fitting.
Picture of HENCO Bend 90 degrees press
103764
This elbow (90°) is quick and easy to assemble thanks to the press fitting.
SRD 112.86
excl. BTW
Picture of HENCO Bend 90 degrees press
103765
This elbow (90°) is quick and easy to assemble thanks to the press fitting.
SRD 134.97
excl. BTW
Picture of HENCO Ball valve with handle
103768
The water supply can be shut off with the ball valve. If the handle is perpendicular to the pipe, the passage is blocked. This tap is suitable for pipes with a diameter of 16 mm. The crane has two press couplings.
SRD 600.27
excl. BTW
Filters Close